Work gloves, sourced like a factory programme — not a catalogue gamble.
Toughora is the factory-direct supply programme for reusable work gloves: 157 catalog models across cut-resistant, coated, impact, anti-vibration, winter and specialty lines, built for importers, PPE distributors and industrial buyers who need consistent lots, honestly printed ratings and private-label support.
Request a quote
Tell us the glove, the level and the volume. We reply with specification, MOQ and terms for that exact model.
This quick form carries your answers to the full inquiry form. Nothing is sent at this stage.
Twelve lines, 157 models. One knitted-glove platform.
Every line is built on seamless knitted liners with a dipped or moulded coating, so sizing, packing and quality control stay consistent across the range.
Cut-resistant gloves
HPPE, steel-fibre and aramid liners with PU, nitrile and latex coatings; printed ANSI levels mainly A2–A3, rising to A6 and individual A7 models.
Explore the line ↗COATING LINE · 36 MODELSNitrile-coated gloves
Smooth, micro-foam and full-dip nitrile palms for dry, oily and wet handling.
Explore the line ↗DEXTERITY LINE · 13 MODELSPU-coated gloves
Thin polyurethane palms for assembly, inspection and precision handling.
Explore the line ↗PROTECTION LINE · 6 MODELSImpact-resistant gloves
TPR back-of-hand protection over knitted liners, headed by ATV004 with printed ANSI/ISEA 138 Level 1.
Explore the line ↗SPECIALTY · 13 MODELSAnti-vibration gloves
Foam-rubber and TPE damping palms, most with EN ISO 10819 printed in the catalog.
Explore the line ↗SEASONAL · 12 MODELSWinter work gloves
Thermal acrylic and terry liners; Superthermal models carry printed EN 511 cold ratings.
Explore the line ↗Also in the range: sandy nitrile gloves · latex-coated gloves · TPE injection gloves · cut-resistant sleeves · kids gloves · leather work gloves · bulk programmes.
Toughora at a glance
The facts a buyer needs before the first email — stated plainly.
Consistency is the product.
A coated glove is a production-line product: the same liner yarn, the same dipping line, the same curing settings, lot after lot. When a buyer changes factories between orders, the glove that arrives changes with it — grip, thickness, sizing and, for cut-resistant models, the tested performance the rating rests on. Toughora is organised around the opposite approach: every model in this programme is one manufacturer's catalog model, listed with that model's own specification, so the tenth order matches the first.
That discipline matters most where a number is printed on the glove. Ratings on this site are never range claims: each model page reproduces the EN 388 string and ANSI level printed for that exact model in its manufacturer's catalog, and the model's CE / test report is available on request. Where a catalog contradicts itself on a model — the same model listed twice with different values — the model is listed without a rating until the value is confirmed against its test report. A smaller claim that can be traced beats a bigger one that cannot.
If you are building a private-label glove range, or consolidating a fragmented buy into one consistent programme, start with the specification. The cut-resistant line is the core of the range; the coating guides on this site will help you fix the liner, coating and level before you ask for numbers.
Gloves by application
Safety managers usually start from the job, not the product code. These pages map common tasks to the lines that fit them.
Metal fabrication
Cut risk from sheet edges, stamping and deburring — start with the HPPE cut-resistant line.
View application ↗APPLICATIONAutomotive assembly
Dexterity and oil grip for line work — PU and sandy nitrile coatings.
View application ↗APPLICATIONConstruction
General handling plus impact risk — sandy nitrile and TPR lines.
View application ↗APPLICATIONWarehouse & logistics
High-volume issue gloves where cost per pair and consistency rule.
View application ↗APPLICATIONGlass handling
Cut models whose printed levels suit sheet glass work.
View application ↗APPLICATIONOil & gas
Impact and cut exposure on rigs and in maintenance — the ATV004 and T1001 models.
View application ↗Clear answers, before you order.
What kinds of work gloves does Toughora supply?
Reusable knitted work gloves with dipped coatings, across 157 catalog models: cut-resistant gloves, nitrile-, PU- and latex-coated gloves, sandy nitrile, TPR impact and anti-vibration gloves, winter gloves, TPE injection gloves, cut-resistant sleeves, a leather-palm model and a children's line. We do not sell disposable gloves on this site.
Who buys from Toughora?
Importers, PPE distributors, safety wholesalers and industrial buyers who need a factory-direct source for coated and cut-resistant gloves, including private-label programmes.
How are your ratings stated?
Per model, exactly as printed in the manufacturer's catalog: the EN 388 string and, where the catalog prints one, the ANSI/ISEA 105 level. CE / test reports are available on request — report numbers and documents are provided per model when you inquire. Where a catalog lists a model with conflicting values, we publish no rating for that model rather than choose the better number.
Do you sell gloves for Europe?
Yes. The models in this range carry their manufacturers' CE documentation, and test reports are provided per model on request. One caution for own-brand programmes: under Article 12 of Regulation (EU) 2016/425, selling PPE under your own name or trademark makes you the manufacturer in law, with the technical-file duties that follow — the OEM page explains the routes before you commit.
Can you make gloves under our own brand?
Yes — OEM and private label are core to the programme: your logo on the glove, your retail or bulk packaging, your size and colour mix.
What is the minimum order quantity?
6,000 pairs per model, across the range. Packing is individual packaging or 12 pairs per polybag. Lead time is confirmed per order in writing.
Is there a standard glove weight?
No — work gloves have no fixed weight. Weight is customised: we accept custom weight requirements, made to your specification and approved sample.
Can I get samples before ordering?
Yes. Samples of listed models can be arranged so you can check fit, coating grip and finish before committing. Sample and freight terms are confirmed for each request before anything is dispatched — see the samples page.
How do I get a quotation?
Use the RFQ form on this page or the dedicated RFQ page. Tell us the model or glove type, sizes, estimated quantity and your target market, and we reply with the specification, MOQ and terms for that exact model.
Start with a specification, not a sales pitch.
Send the work, the hazards and the volume. The reply prices your exact specification — model, MOQ and lead time included.